smart spring is a system designed to control a motor drive or solenoid metering pumps instead of peristaltic pumps*. The new system can operate in programmable mode (triggered by signals) or in relay mode.

(*) pumps not included

Systems available

smart spring

triggered via signals from laundry machines, 20 washing formulas capability each having unique active times and delay times for each relay outputs.

smart spring R

with relay mode operation. Relay outputs active as long as their respective signals are present. Activation times, delay times and formulas disabled.Maximum flexibility

• Available in versions from 7 relay outputs covering a wide dosage range

• Power relay for heavy duty loads

• Able to dose up to 3 chemical products simultaneosly

Plastic enclosure

• 7 relay outputs connection electrical circuit 

• Front cover opens to 85° allowing easier electrical connections

• IP 65 protection degree and class 2 electrical insulation (no ground connection required): equipped with tamper resistant devices

• Easy maintenance, no special tools required and easy wall mounting or removing thanks to the built-in mounting brackets

Technical features

• System power supply 100÷240 VAC

• Power consumption (max) 100W

• Input signals Possibility to connect at maximum 6 trigger signals 20÷230 VAC or 150÷230 VAC (selectable by jumpers)

• Relay outputs possibility to connect at maximum 7 pumps

• Relay

    • Designed to switch heavy duty loads up to 0,55 Kw

   • Din rail mounting

   • Normally open 

MS1 pumps are mechanical diaphragm metering pumps featuring a  

spring return mechanism in an aluminium housing.

FEATURES

Capacity:                   from 80 to 460 L/h

Max pressure:            10 BAR

Stroke rate:               58 • 78 • 116 strokes/minute

Diaphragm diameter:  from 108 to 165 mm

Motor:                       standard  0,37 Kw (IP 55)

Stroke length:            4 mm • 6 mm

-Liquid end SS 316 or PP liquid end (standard).

-PTFE diaphragm the material in contact with the liquid to be dosed are listed in the "pump head materials" table (special materials may be supplied on request).

-Max dosage temperature

• SS 316 pump head: 40° C

• PP pump head: 40° C

-Flow rate adjustment Every pump can be equipped with an electric actuator which accepts a 4÷20 mA.

Analogue dosing pump with constant flow rate manually adjustable by control dial on the front panel, two frequency range (0÷20% or 0÷100%), Power-ON led indicator

-Clever just 4 Models, Just PVDF, all functions in one pump

-4 models that cover 1 to 60 lt/h with an output pressure up to 20 Bar

-1 Casing allows skids to be pre-constructed, as the fixing points remain constant, and the pumps can be selected on confirmation of the dosing flow

-Inventory Reduction

-Reduce spares stock holding

-PVDF is suitable for almost all chemical used in the Industrial, Waste Water Treatment and potable Water applications

-The use of Ceramic balls as standard improves the pumping reliability and the chemical compatibility of the whole liquid end

-Full chemical compatibility